盾構門式起重機 出渣門式起重機

產品簡介

1. U型地鐵翻渣吊鉤門式起重機是根據地下施工的使用要求及工況，在通用門式起重機的基礎上研製出來的專用門吊，專用於地下施工時翻轉倒土及調運物品。
2. 起重機由小車，門架，大車運行機構，該機構由液壓工作站和翻渣鉤組成。
3. 挂梁中間設有吊鉤，用於吊運一般物件。
4. 大車運行機構採用8輪4驅形式。固定在台車上的電機通過立式減速機驅動車輪，並設有防風夾軌器，起重機正常工作時，夾軌器的夾鉗離開軌道，當起重機停止工作時，操作人員將夾鉗放下，夾住軌道，防止起重機滑動。
5. 倒土方向根據施工現場而定。
6. U型吊鉤門式起重機適用於露天倉庫或鐵路沿線進行一般的裝卸及起重搬運作業。配專用吊具可做集裝箱作業。 U型吊鉤門式起重機 由門架、大車運行機構、小車、電器設備等組成。門架採用箱型焊接結構，大車運行機構採用分別驅動。全部機構均在操縱室內操縱。起重機導電形式分電纜和滑觸線兩種，訂貨時任選一種。

Hook gantry crane is a u-shaped tube double slag according to the working condition of the use of underground construction requirements and, on the basis of general gantry crane developed special door crane, dedicated to flip down during the construction of underground soil and dispatching goods.
Crane by car, the door frame, supporting institution, the institution consists of hydraulic station and double slag hook.
Beam in the middle of a hook, commonly used for lifting objects.
In the form of eight rounds of 4 x4 supporting institutions.Fixed in the car's motor by vertical reducer drive wheels, with wind clip rails, the normal work of the crane, clip of rail clamp left orbit, when the crane to stop working, the operator will clamp down, clamp orbit, to prevent sliding crane.
Pour the soil direction according to the construction site.
U-shaped hook gantry crane is suitable for open storage or along the railway general loading and unloading and lifting handling operations.With the special container spreader can do homework.U hook gantry crane By the door frame, supporting institutions, vehicles, electrical equipment, etc.Box welding structure is used in door frame cart running mechanism driven by respectively.All the agencies are controlling interior controlling.Conducting form points cable crane and sliding contact line two, choose a kind of when you order it.