Henan mine crane co., LTD., LDPE light electric single-girder crane belongs to low headroom small cranes, electric hoist is located in the main girder side, increased the working space of the hook, can reduce the cost of plant height and.Suitable for factory workshop low headroom.
LDPE electric single-girder crane made up of a compound steel box girder, beam, trolley and operation mechanism, the car run by the beam, trolley frame and type of electric hoist, USES the partial hanging form, run at the side of the main girder, under the block position from the traditional main promoted to the upper girder, effectively improve the lifting height.
The car running with cone-shaped motor brake, open gear transmission.
Girder to the box structure, burp, level consists of wheel, safe and reliable, and can prevent gnaw rail.
One driven by respectively form, cone-shaped motor brake, open gear transmission.Running motor could be selected according to user requirements soft start and frequency control of motor speed, crane stable starting, safe and reliable operation.
Operation mode has a ground controller, wireless remote control and the driver room three kinds of operation form.Bridge has open, closed type two kinds.
Span is 7.5 ~ 22.5 m (can be non-standard design according to user requirements), the level of work for A3, working temperature is 25 ~ 40 degrees.
